Flashing a new firmware by Browser What you need to flash You need the image file you want to flash. Image files have the extension *.nfi. You can't flash other images like *.img files. Don't try it - it won't work.

Hi I wish to flash my clone DM800, which stopped working (no longer boots up - stops at bar on boot up on little screen). I have tried. DM800 HD - Dreambox Made in China OEM Forum. Free Dreambox Images Download (Only for NEWB DM800 SIM2)--Merry Christmas!-sim201-SSL76D-20101222. Powerful receiver for digital TV and Radio programs. Main features are a 300 MHz processor the Dreambox DM800 HD PVR supports the Linux TV API. Have a look to. Robert Plant Shaken And Stirred Rar File more.

You need either a DHCP server, a configured bootloader or a serial cable and a terminal program like HyperTerm. You need a browser, and a network cable. User Stories Applied Rapidshare: Software Free Download. If you connect the Dreambox directly to the PC, you need a cross cable, if you connect trough a switch/hub/router you need a normal (non-cross) cable. To flash a new image, you can use the second stage loader. It must be present and not broken. The following steps assume you have a DHCP server.

If you don't have one, you have to setup an IP address in the bootloader's serial setup: () - Power down the Dreambox, either using 'shutdown' and by removing the power connector. Standby is not enough! - (1.) Press and hold the power button. Replug the power connector into the Dreambox. - (3.) A text '*** STOP ***' should appear. Program To Erase Cd-r. Now you can release the button.

The bootloader entered the 'waiting' mode. - (4.) Above the '*** STOP ***' text, there should appear an IP-address (four decimal values with a dot in between). If there appears the string 'dhcp' instead, the box still searches for a DHCP server. Wait a bit. If it doesn't change, something doesn't work with the DHCP server. Check wether network cable is plugged in etc.

If it just doesn't work, set an IP using the serial terminal - Now, open a browser on your PC. (1.) enter in the address line '(where ip must be replaced with the value in the LCD). - (2.) on the bottom of the page, there's a link called 'firmware upgrade'. - On the next page, you can select the flash image you want to flash. Be sure that it has the '.nfi' extension. You can't flash other images (like.img)! - Click on 'FLASH!'

It might take some time to upload and flash the image. - Switch the box off again, and on again. The new image should be flashed and working.